Product Videos

Coming soon!

Product Care Instructions

For all non-painted PLA 3D-printed products:

• Storage: Keep in dry environments under 86°F/30°C and out of direct sunlight.
• Light-Duty Cleaning: Use a microfiber cleaning cloth to gently wipe away any dust or smudges. A small amount of isopropyl alcohol (or an alcohol wipe) may be used for more resilient smudges.
• Heavy-Duty Cleaning: Hand wash under room-temp water with unscented dish soap and a soft, unused sponge or towel. Dry thoroughly immediately after washing.

For all ***painted and/or fully finished *** PLA 3D-printed products:

• Storage: Keep in dry environments under 86°F/30°C and out of direct sunlight.
• Light-Duty Cleaning: Use a microfiber cleaning cloth to gently wipe away any dust or smudges. IPA and/or cleaning agents are not recommended.
• Heavy-Duty Cleaning: Avoid this if possible, but spot clean with minimal water only as-needed. Cleaning agents are not recommended.

Additional care for jewelry products:

• All jewelry products are sanitized prior to shipping/distribution, but should be sanitized again prior to wearing.
• Isopropyl alcohol or saline spray are recommended to sanitize all metal hardware prior to use.

Product Warnings

Warning: NOT WATERPROOF!

PLA is a bioplastic. It is prone to warping under high humidity/extended exposure to liquids. Do not fill or submerge any product in water or other liquids for an extended period of time.
To use certain products (e.g. Decorative Potion Bottles) as vases for live plants, I recommend utilizing a waterproof liner insert.

Warning: KEEP AWAY FROM HIGH HEAT/FLAMES!

PLA is a bioplastic. While it is non-flammable under typical conditions, it will warp and/or melt under high heat conditions. Keep products away from high heat conditions (including direct sunlight) or open flames. Products like Tealight Holders should only be used with flameless/LED candles-- not real ones.

Potential Allergen Warning

The D3D studio is pet-friendly. While I take great care to promote a "clean zone" for production, products and/or packaging are still likely to come into contact with cat or dog dander.

Potential Choking Hazard

D3D products are not edible, and they are not intended for children. Small products like jewelry and pieces/parts of products may pose a choking hazard. Do not chew on or attempt to consume any products or parts of products, and keep out of reach from children.